卡箍式硅橡膠軟接頭“非標定制”
Clamp type silicone rubber soft joint "non standard customization"

上海淞江減震器集團有限公司官方網站為您介紹：卡箍式硅橡膠軟接頭“非標定制”信息，淞江集團為眾多客戶定制開發卡箍式硅橡膠軟接頭產品，該產品主要通過抱箍鏈接的方式進行密封，以下是詳細介紹。
The official website of Shanghai Songjiang shock absorber Group Co., Ltd. is introduced to you: the "non standard custom" information of the clamps type silicone rubber soft joints, and Songjiang group for many customers to customize the development card hoop type silicon rubber soft joint products. This product is mainly sealed by the way of the hoop link, which is introduced in detail.

以下是淞江集團卡箍式硅橡膠軟接頭實物拍照，請勿轉載，請勿修改，謝謝合作。
The following is a photo of the Songjiang group's silicone rubber soft connector. Please do not reprint it. Please do not modify it. Thank you for your cooperation.

該款卡箍式硅橡膠軟接頭是采用硅橡膠生產，厚度最薄可以生產3mm，最厚可以生產15mm，，不耐油，不耐酸堿，卡箍式硅橡膠軟接頭最大缺點就是不耐壓力，最大使用壓力不超過3kg，不是橡膠管不耐壓，而是卡箍的鏈接方式不耐壓力。
This type of clamp type silicone rubber soft joint is made of silicone rubber, which can produce 3mm with the thinnest thickness. The thickest can produce 15mm, the high temperature resistance is less, oil resistance, acid base, and the biggest disadvantage of the clamp type silicon rubber soft joint is the non pressure resistance, the maximum use pressure not more than 3kg, not the rubber tube pressure, but the clamp. The way of linking is not resistant to pressure.

相關鏈接：【樣冊P40】KKT型卡箍橡膠接頭
Related links